My daughter loves Max and so do I, but...
I want Maxine's (aka Head #2's) ears to be better than Max's. This is at the top of the list of improvements I want to make this time around. Not only is the fur going the wrong way on Max's ears, growing towards the base instead of towards the tip (in spite of the fact I *did* mark the fur direction correctly on the pattern!) but IMO the ears... flap around... too much when the mask moves. You can see this especially clearly at .018 minutes in this video.
Above, the nascent Max with his freshly designed Foamy ears. (And the cat hair mustache my daughter made for him.) I think part of the issue is evident here- the ears have too much height in relation to their width at the base. Theory being, a wider base would provide more support and hopefully, less flapping.
Above, snips from one of Dream Vision Creation's ear making tutorials (used with permission.) I referenced these often making the patterns for Maxine's ears. The ears on this mask are a bit wider at the base than are Max's. If they were his ears, the bottoms would come to the point where the top half of the hinge is glued to the head, not to nearly the center of the hinge as they do.
Above, using a snip from a Dream Vision Creations tutorial (left) as pattern reference for Maxine's ears (right), aiming for the correct width at the base.
.Above left, the paper pattern in progress, and right, the finished Foamy ears. Looks like I initially made the patterns a little bit **too** wide at the base, and so narrowed them down a bit in the final version.
Above left, the pattern piece (tan) for the back of Maxine's ears, and right, the pattern piece (green) for Max's. (See, I DID mark the proper fur direction on Max's pattern piece!!) As it turns out, both pattern pieces are 6 1/2" high, but while Max's pattern piece is 7" wide, Maxine's is nearly 9" wide.
And since Maxine isn't finished yet, this is the closest thing I have to a side by side comparison of the two- Max is the green one and Maxine is the tan one. (Credit where credit is due- Max is made entirely with DVC parts, where Maxine is made with my own resin base and DVC nose, teeth, tongue and eye blanks.) So far I like the ears with the wider base much better! I think there'll be other things I'll need to do to prevent flapping, however... stay tuned!!
I make masks. Because art is more fun when you put it on your head.