Patterning

I love patterning! Seems like alchemy, turning masking tape and magic markers on a resin base into lovely soft fur on a lifelike head! The tutorial on patterning at Dream Vision Creations is quite good, I didn't find any gaps in the info there I had to figure out how to fill in myself.
​

​Above,starting the endeavor. The base is covered with a layer of plastic wrap and masking tape, the neck is filled out with plastic bags from the grocery store. Note to self- prior to patterning, save plastic shopping bags, don't be so efficient about bringing them to the recycling station at Price Chopper. This time around I wound up having to steal a big handful at the self-service checkout after buying a few token cans of tuna fish. 

​Above, the taping completed, and the markings/areas of different colors marked in with blue magic marker. I haven't decided what kind of tape I like best for patterning yet. Last time I used Duck Tape, which is tough and durable (and comes in lots of fun colors!) but very, very sticky and so a little tricky to work with. This time I used plain old Scotch brand masking tape, which is less durable and not quite sticky enough.

Above, pattern pieces labelled. Looks about as comprehensible as hieroglyphics. I won't get into what it all means here, as the DVC tutorial covers it well, but I will add this one comment- too many hashmarks to show how the pieces go back together are almost as bad as too few. After I had my fur pieces cut out and ready to be sewn together, I had a fair bit of trouble figuring out how the cheeks and eyebrows lined up with the top and back of the head. It didn't help that with so many hashmarks, forgetting to mark one or two in on the fur pieces was inevitable. Taking reference photos like these of the whole thing before it's cut apart can be a real lifesaver.

Above, the head after a visit from the resident OMG OCD!! department. This being my own resin head, and my first effort at making one, I was acutely aware of all its asymmetries, however small they might be. One question I had was how a pattern made on only one side of the head (standard practice as I understand) would fit on the other. So I traced out the pattern on tape covered aluminum foil and flipped it to cover the other side of the head. And yes, I concluded, doing the pattern on only one side of the head works just fine. If anything, doing this helps even out any of the head's little asymmetries.

One thing this exercise DID do was help show me which pieces could be flipped from one side to the other, thus making one big piece without a seam, and which pieces really did need to be two pieces, even if otherwise the fur was all the same color and all went in the same direction and such. For example, the big panel on the neck directly below the jaw looks like it could be one piece, saving me a seam up the middle, but I found there was no way to make one big piece out of it and accommodate the curve going from the center of the chest to the underside of the jaw. So two pieces it stayed. The little triangular shaped part under that piece, however, could  be flipped and made into one piece.
​

Above, the pattern removed from the head, ready to be cut apart and used for a pattern. I think the masking tape "skin" is so cool. Next, laying out the pattern, cutting out the pieces and sewing!